Unwinding and rewinding line

Inlet unit with axial controlled primary unwinder with easily interchangeable 3 "and 6" reel spindles.
Reel diameter measurement system through ultrasonic sensor.
Banquet junction of the heads of the material without overlapping, complete with pneumatically controlled locking tweezers and a rubberized pressure roller.
Vertically moving outfeed roller with adjustable stroke suitable for detaching the material from the table of control during translation.
Towing unit for controlled feed of the material comprising a motorized roller covered in rubber / polyurethane and a presser.
Output group with primary winding axially controlled with easily interchangeable 3"and 6" spindles.
Material alignment system via on-board sensor and actuator for the transverse movement of the winding reel.
Electrical control and general control equipment of the system.

MATERIAL WIDTH:REEL DIAMETER:REEL INTERNAL DIAMETER:
50 ÷ 536 mm max 600 mm 3” - 6”
REEL WEIGHT:INTERNAL CARDBOARD THICKNESS:MATERIAL THICKNESS:
175 kg min 12 mm 0,05 ÷ 0,5 mm
FEEDRATE:STEP:tensioning of the material:
max 100 mm/1” steps of approx. 500 mm 20 ÷ 150 nm
Linea di svolgimento e riavvolgimento 02
Linea di svolgimento e riavvolgimento 03
Linea di svolgimento e riavvolgimento 04
Linea di svolgimento e riavvolgimento 05
Linea di svolgimento e riavvolgimento 06
Linea di svolgimento e riavvolgimento 07
Linea di svolgimento e riavvolgimento 08